Honda VTX C 1800/ 1300 Backrest Kit Installation Manual
download We highly recommend use of Loctite о on all nuts and bolts and check your hardware on regular basis. 1) Install the backrest bars with the pad. Do not tighten the bolts until the backrest is...
View ArticleHONDA VTX 1300 AND 1800 RETRO DRIVER BOARDS INSTALLATION INSTRUCTIONS
download 1. Remove the stock driver boards. Looking underneath the boards locate the pins on which the boards pivot. Remove the circlips and washers. Slide the pins out and remove the board from its...
View ArticleHonda VTX 1800 And 1300 LINK ARM INSTALLATION INSTRUCTIONS
download 1. If you are installing the link arms at the same time as the passenger floorboards first install the floorboards per their instructions. 2. Fold the boards up in the retracted position....
View ArticleHONDA VTX, VTX RETRO AND VALKYRIE DRIVE SHAFT COVER INSTALLATION INSTRUCTIONS
download 1. Place the cover over the drive shaft housing. 2. Hook one end of the springs provided into the lower holes. Wrap the springs around the backside of the drive shaft housing. Using a needle...
View ArticleHONDA VTX 1800R AND VTX 1300R SOLO RACK INSTALLATION INSTRUCTIONS
download 1. Remove the stock passenger seat. And “U” shaped mounting bracket from the rear fender. 2. Install the 2 “L” brackets provided (NOTE: there is a left and a right) onto the rear fender using...
View ArticleHonda VTX 1300 Trike Conversion Installation Manual
download Removal of Original Parts Secure and raise the motorcycle 9 to 10 inches using a quality motorcycle lift. Remove the following from the vehicle. See OEM manual for detailed instructions. Items...
View Article1996+ HARLEY DAVIDSON FLH INNER AND OUTTER FAIRING MOUNT FOR HONDA VTX 1300...
download This mount was made to attach the HD FLH assembled fairing to the 4 fork mounting points on the VTX 1300 using the Memphis Shades mounts. This allows use of the MS allen wrench to quickly...
View ArticleHonda VTX 1300 EZ-Steer Installation Instruction
download installation of the Champion EZ-Steer system is similar to the installation of the OEM triple clamps of your Honda VTX 1300 Motorcycle. We strongly recommend that you use your OEM service...
View ArticleHONDA VTX 1300 AND 1800 TRIKE CONVERSION KIT Owner's Maintenance Notes
download 1. Tire Pressure and Rotation : Keep the nominal tire pressure at about 20-25 psi. It is not necessary to periodically rotate the trike tires unless you experience unusual tire wear. 2....
View ArticleBMW K 1300 S, K 1300 R and K 1300 GT SPECIFICATION
download The K 1300 S with 175 hp, the K 1300 R with 173 hp and the K 1300 GT with 160 hp. The new K bikes feature updated transmission and clutch assembly, plus smoother engine performance and new...
View Article
